The subtleties and nuances of proper car washing at home, as in the salon
Car wash. These two words contain love and a special process that only the driver will understand. If you are interested in the nuances that may arise along the way, or general questions about how to properly wash the car with your own hands, and what means to use — this material is for you.
Cleaning a car is an important part of its maintenance and keeping it clean. It not only creates a pleasant atmosphere inside the car but also improves its appearance. In the car rental service, cleaning is done after each use of the car to prepare it for the next customer. So when you are planning your next vacation, for example, in the UAE, and would like to take a Porsche for rent in dubai, you want to be sure that you will not face any trouble. You can be sure that the car will be fully prepared for the trip. Any rental company that is keen on the quality of the hiring service provided and on customer satisfaction. You can use the process of cleaning a car in the rental service as a sample for cleaning your car at home.
First, let’s start with superficial recommendations, then we will go deeper into the process itself and analyze all its stages. We will also tell you how to wash the car, that is, what means are used, and how to do it correctly.
General recommendations
The first advice is not to wash the car until the engine is turned off. This is applicable to all vehicles, from Porsche to small subcompacts. You need to give it some time to cool down and only then start washing. The temperature drop can damage the paintwork.
The temperature should be at least -10°C if you wash your car in winter. Use only cold water. This is important for two reasons: the temperature drop will have a bad effect on the paint and varnish of the car; water will get into gaps, and crack and freeze.
For summer washing, the water should be warm. Again, so that there is no temperature drop.
How to wash the salon
Let’s start washing. You will need some clean rags, cabin cleaners, a soft brush, and a vacuum cleaner.
Free the car from all the excess, and clean the glove compartment. Then remove the covers, take out the mats, and move the front seats back a little. Next, remove large debris with your hands and vacuum the interior. Take the interior cleaner and apply it to the upholstery.
Doormats can be knocked out, vacuumed, and treated with a textile agent. It lifts the pile and improves the appearance. Covers can also be treated with auto chemicals if they are made of cotton or leather.
- Vacuum the surface before applying;
- Shake the jar several times;
- Spray the foam evenly over the entire surface;
- Use a brush to rub the foam and wait for 5 minutes;
- Wipe the treated area with a clean cloth, after wetting it;
- Vacuum the upholstery again as soon as you finish wiping.
Complete this procedure by wiping the dashboard. You can simply use a damp dust cloth or apply an additional polish. It will give an antistatic property to repel dust and dirt.
How and how to wash car windows
Glass washing is a simple matter. We will need a glass cleaner that cleans the glass from corrosive stains, insects, grease, oil, and a clean rag. The rag must be especially for the glasses, otherwise, there will be stains. When you wipe it, turn it over so as not to scratch the surface with dirt.
What to use when washing the body
For a simple body wash, you will need a car shampoo and a suede-based cloth. It absorbs water well. If there are bitumen stains on the body, then you need a special tool that will clean them.
What you may need to clean the body:
- A few clean rags and a sponge. One should be suede;
- A scraper with a silicone tip to scrape off corrosive dirt;
- Bitumen stain cleaner, for example;
- Shampoo for car washing or auto shampoo with wax. The last resort leaves behind a thin layer of wax to protect the body.
How to properly wash the car body
The usual sink. Wash off the main layer of dirt with water. After that, apply a car shampoo and wipe the body with a washing sponge. Rinse with water and wipe the remaining water with a suede cloth.
Cleaning of bitumen stains. Apply the product to the surface and wait until it is absorbed. If the contamination is severe, rub the product with a sponge or a wet cloth made of artificial suede. After the product has been absorbed, rinse with water. Ready!
Conclusion
Now you know how to properly wash the car with your own hands, where to start, and how to finish. Following this pattern, you can keep your car and home clean.
*This is a collaborative post
